Overall Axle Ratio
14.8:1, 18.04:1
Hydrostatic Transfer Gearbox Ratio
1.53:1, 1.76:1, 2.13:1
Maximum Load Rating
3200 kg (7040 lb) based on 1475 mm wheel track and axle
mountings at 960 mm centres.
Torque
Nominal output torque at both wheels is 6460 Nm (4764
lbf.ft.).
Brakes (Optional)
Maximum braking torque at both wheels: 6050 Nm (4370 lbf.ft.),
based on axle ratio of 14.8:1 and two friction plates per side. Hydraulic
operating pressure: 60 bar (900psi).
Parkbrake (optional)
Maximum braking torque at both wheels: 5125 Nm (3780 lbf.ft.). Cable pull at axle: 2670 N (600
lbf.), operating at 130 mm centres.
Approximate weight
Model: 215PB (standard input): 120 kg (264 lb)
Model: 215PBH (hydrostatic): 190 kg (418 lb)
Approximate Oil Capacity
3 litres (5.3 pints)
Options
Integral transfer gearbox with hydrostatic motor input ratios up to
2.13:1.
Adapters for all major hydrostatic motor suppliers can be supplied.
Wheel Fixing Options
6 Studs : M18 thread x 2 mm pitch on 205 mm PCD, with 158/159 mm
wheel spigot diameter
6 Studs: 7/8" BSF on 205 mm PCD, with 158/159 mm wheel spigot diameter.
5 Studs: 5/8" BSF on 165.1 mm PCD, with 125 mm wheel spigot diameter.
Mounting (Standard)
4 off 18 mm diameter holes: 114 mm by 83 mm hole centres, on
rigid mounting pads, with 960 mm mounting centres
installation drawing for the 215 in PDF format (51kb)
The PDF files on this website can be read online or printed using the free Adobe®
Acrobat® Reader.
If you do not have this software installed on your system, you may download it from
Adobe's website.
